🌟How To Measure Curtain Size🌟

  
  1.Curtains width=2xA (twice of the rod or the track width).

  2.Curtains length=B/C/D (up to your window height).

    

    Style 1: Rings tape top （as the picture above shows)

     The inside diameters of the rings is 4cm ,outside diameters is 6cm .Suitable for the curtains poles.

      Style 2: Hooks tape top  （as the picture above shows)

    Hooks curtains tape (7cm width）is sewed on the top of the curtains ,Suitable for curtains pole or tracks

   Style 3: Pull pleated tape（as the picture above shows)

     Pull pleated tape works betters on the fabric which are not too thick .Suitable for curtains poles or tracks

 

  Note:

   

     1.  Price is for 1 piece  of Curtain  / Tulle    .Not for 1 pair or 2 panels .

     2.  Size: If you want to change length, please leave a message, any length Less than                270cm,t he price is the same.Accept Custom ( if you do not find the size that you                  want, pls feel free to contact us.)

     3.  Tips: For proper fullness, panels should measure 2-3 times the width of your window.

     4.  Please allow slight deviation ( 1-3cm ) due to hemming.

     5.  All items are for real shooting. However, different monitors and different brightness                may cause colors to vary slightly.

    If your window is 150cm wide, we suggust 2 pieces  (W150cm*L250cm) 

    If your window is 200cm wide, we suggust 2 pieces  (W200cm*L250cm) 

Measuring Your Window

WIDTH

On most curtains & window treatments, it takes two to three times more material/curtain to provide the proper fullness in appearance when installed/hanging on rod than the actual window width.

Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more - sheers can be 3 times the window width) to achieve a look of proper fullness.

Example: If your window measures 36" wide (window width x 2 = 72"), you need curtains that will give a minimum width of 72" or 2 panels for that window. In this case 2 panels will give about 100" to 120" of width which will look nice and full. Always round up to the next full number.

Common Fullness multipliers (multiply your measured width by):

Standard fullness multiply by 2

Deluxe Fullness multiply 2.5

Ultra fullness multiply by 3

LENGTH

Measure the length of the window or area you want to cover from top to bottom. Overall curtain length, anywhere from the sill to the apron or to the floor is a personal preference and need not be exact. By moving your rod up or down a little you can adjust the position of the curtain at your window.

If sill length is desired, just below the bottom of the sill is correct.
Other hanging styles bring the curtain to the floor in order to “puddle"